Compass M-13 Front Rack Cantilever Brakes 1
Compass M-13 Front Rack Cantilever BrakesCompass M-13 Front Rack Cantilever Brakes

Compass M-13 Front Rack Cantilever Brakes

$148.00

Randonneur bikes carry their load in a handlebar bag on the front rack, where it is easily accessible. The Compass M-13 rack is made by Nitto exclusively for Compass. The design was inspired by the racks of classic René Herse bicycles. The rack is fillet-brazed from lightweight steel tubing, with a plated finish for durability. The elegant tabs for mounting the rack to the cantilever bosses are brazed into the ends of the rack support tubes, like dropouts on a classic bicycle frame. It is one of the lightest production racks available today.

The rack is available in two versions: a “narrow-tire” version is designed to fit bike frames with clearances for narrow and medium-width tires, and a “wide-tire” version for bikes with wider clearances.

Made in Japan. 10 year warranty

Clear selection

Category: . Tag: .

To determine which racks fits your bike, measure the distance from the fork crown to the cantilever bosses. Note that the rack fit can be adjusted slightly by carefully bending the diagonal supports.

The racks are supplied with custom bolts that provide secure attachment:

      2x M6 bolts for mounting to cantilever post with smaller-diameter M5 forward extension to hold the rack securely
      2x M5 domed nuts
      M6 nut for fork crown mount
      Nut with built-in washer for fender mount

 

    Light mount on left side.
      Attaches to fork crown and cantilever brake pivots.
 
      Custom hardware for secure attachment.
 
      Platform: 165 mm x 90 mm
 
      Narrow: 65mm between cantilever bosses, 96mm from fork crown
 
      Wide: 75mm between cantilever bosses, 100mm from fork crown
 
    187 g (rack) 23 g (hardware)